CAN FD panda kit is not necessary if purchasing a comma 3X.
Description
Most newer Hyundai, Kia, and Genesis models are equipped with the CAN FD
communications protocol.
The CAN FD panda kit enables the comma three to talk to your CAN FD car.
Along with a normal order of a comma three and car harness, this kit comes
with all the extra hardware you’ll need.
Check compatibility to see if your
car requires the CAN FD panda kit and follow the setup guide below for installation
instructions.
What's in the box?
1 red panda
1 harness box
1 USB A-A cable
1 USB C OTG cable
1 OBD-C cable (1.5 ft)
Setup instructions
See comma 3X setup guide to view
the general set up procedure for the device, but final cable configuration
is as follows:
Use the extra OBD-C cable to plug the red panda into the harness box
connected to the LKAS camera harness.
Connect one side of the USB-A to USB-A cable to the red panda, and the
other to the USB-A to USB-C OTG dongle.
Connect the USB-A to USB-C OTG dongle to the auxiliary port on the comma
three (port near the bottom).
Plug the RJ45 cable into the second harness box (not connected to the
LKAS connector) – ensure the cable is fully seated.
